3 Ton vs 4 Ton Floor Jack: Which Fits Your Garage? (November 2026)
A 4 ton floor jack wins for most home garages because its extra capacity covers trucks and SUVs without working near its limit. A 3 ton jack suits lighter cars and costs less weight and money, so it fits tighter bays and simpler jobs.
On this page (8 sections)
A 4 ton floor jack wins for most home garages because its extra capacity covers trucks and SUVs without working near its limit. A 3 ton jack suits lighter cars and costs less weight and money, so it fits tighter bays and simpler jobs.
The tonnage label is the least useful number on the box. What decides your choice is the lift range, the saddle height when the jack is down, the weight you move around and the vehicles in your driveway.
The Big RED 4 Ton and the Maxority 3 Ton Low Profile show how far apart two jacks can be on those points. One reaches higher and carries more; the other slides under lower cars and takes less space.
Best for tight bays and low carsMaxority 3 Ton Low Profile Steel Floor Jack
3 ton vs 4 ton floor jack: which should you buy?
Buy 4 ton if you lift full-size trucks and SUVs; buy 3 ton if you lift cars and light crossovers. The 4 ton rating leaves headroom for the heaviest home jobs, while the 3 ton rating covers most passenger vehicles.
The Big RED 4 Ton is rated for 8,000 lb and the Maxority 3 Ton for 6,600 lb. That's a 1,400 lb gap, and it matters most when you lift one corner of a heavy vehicle on an uneven surface or with tools and cargo aboard.
Think about the whole corner load, not just the vehicle weight. A truck's front corner can carry well over a ton on its own, and the jack carries that corner, not the whole vehicle.
Neither jack should be used at its full rating for routine work. Leave a margin so the hydraulic system isn't strained on every lift.
That margin is where the 4 ton rating earns its place for truck owners.
What a 3 ton rating really covers
A 3 ton jack is rated for 6,000 lb, and the Maxority lists 6,600 lb. Most sedans and crossovers fall well under half of that, so the jack works comfortably.
The 3 ton choice makes sense when your garage holds cars and small SUVs. It's also the better fit when you want a lighter jack to move, store and carry.
Our floor jack vs scissor jack comparison helps if you're deciding between a full garage jack and the emergency jack in your trunk.
When the 4 ton rating is worth the extra weight
The 4 ton rating pays off for full-size pickups, heavy SUVs and anyone who wants one jack for everything. The Big RED's dual piston pump lifts loads five times faster than a single pump, which matters when you're lifting a tall vehicle to a high saddle point.
The trade is weight. The Big RED 4 Ton weighs 100.8 lb, so it's a jack you roll into place rather than carry.
That's fine in a fixed bay and awkward if you move it between garage and driveway often.
If your garage is tight, read our low profile vs regular floor jack guide before you commit to a wide-stance jack.
How high does each jack lift?
The 4 ton reaches 20 inches and the 3 ton reaches 19.9 inches, so height is nearly a tie. What separates them is where each jack starts when it's fully down.
The Big RED 4 Ton has a lift range of 3-7/8 to 20 inches. The Maxority 3 Ton reaches 19.9 inches at the top.
For a truck or SUV with a high lift point, either jack gets you there. The Big RED's extra fraction of an inch won't change the job, and the Maxority's 19.9 inches is close enough that height alone doesn't decide the purchase.
The starting height is the real story. The Big RED begins at 3-7/8 inches, and that's too tall for many lowered cars.
The Maxority's low-profile design is built to slide under vehicles with minimal ground clearance, so it wins the low-car job.
High lift points and tall vehicles
Pick the Big RED 4 Ton when your lift points sit high, such as on a lifted truck or a full-size SUV. The 20 inch top gives you room to raise the corner to a comfortable working height before you set stands.
The wide stance adds stability under load, which matters more as the saddle goes up. Set the jack on flat, solid ground and chock the wheels before lifting.
Clearance under lowered cars
Pick the Maxority 3 Ton for a lowered car, a sports car or anything with aftermarket suspension that drops the undercarriage. Its long reach also helps when the lift point sits back from the wheel arch.
The low-profile shape doesn't just fit under the car; it also keeps the handle at a workable angle when the car sits close to the floor.
Which jack fits a small garage?
The 3 ton low-profile jack fits tighter bays because it's lower and lighter, while the 4 ton needs more floor space and a wide stance. Measure your bay before you buy either one.
The Big RED 4 Ton measures 7.9 x 15.8 x 31.2 inches and weighs 100.8 lb. The Maxority's low-profile body takes less vertical room on a shelf or under a bench.
Handle storage is the other half of the garage question. The Big RED includes a pumping handle, and the Maxority includes a pumping handle too.
A detachable handle lets you hang the jack against a wall or slide it under a low shelf.
Our guide on how to store a floor jack covers upright storage, wheel chocks and keeping the hydraulic piston protected. It's worth a read before you pick a permanent spot for a 100 lb jack.
Rolling and positioning in a tight bay
The Big RED 4 Ton rides on two large steel casters and two 360-degree swivel casters, so it steers smoothly even at its weight. In a narrow bay, the swivel casters do most of the work.
A wide stance helps stability but needs clearance on both sides. Check that you can roll the jack past the wheels and still swing the handle.
Shelf and wall space
A low-profile jack like the Maxority is easier to tuck away because it sits closer to the floor. If your garage stores bikes, ladders and boxes along the walls, a lower jack leaves more usable height.
Either way, keep the jack on a dry floor and away from damp concrete. Rust resistance matters on the piston and casters over the years.
How do the two jacks compare on safety?
Both jacks include overload protection, and the Big RED meets ASME safety standards. Safety comes down to using the jack within its rating and pairing it with stands.
The Big RED 4 Ton has a safety bypass feature that prevents overloading, meets ASME safety standards and includes a one year limited manufacturer warranty.
The Maxority 3 Ton has a built-in safety valve on the lift saddle to prevent overloading and a stable saddle that holds the vehicle without slipping. Maxority backs it with a 90 day warranty.
Overload protection on both
Both jacks stop you from pushing past the rated load. That's useful protection, but it isn't a license to lift at the limit.
The bypass is a backstop, not a working target.
The Big RED's wider stance also helps when the saddle is high. Stability at height matters as much as raw tonnage for anyone lifting a truck corner.
Warranty and long-term cover
The Big RED's year of cover beats the Maxority's 90 days on paper. If you'll use the jack often and want longer cover, that's a real point for the Big RED.
The Maxority's shorter warranty is worth factoring in if you plan heavy, frequent use.
For a closer look at a similar low-profile option, our Jack Boss floor jack review covers another jack in this class.
Which jack is easier to live with?
The 3 ton is easier to move and store; the 4 ton is easier to trust on heavy loads. Pick by the vehicles you lift and how often you reposition the jack.
The Big RED 4 Ton is a fixed-bay tool. At 100.8 lb, you'll leave it in one spot and roll it where needed.
That's fine when your garage has the floor space and your main job is truck and SUV maintenance.
The Maxority 3 Ton suits a garage where the jack doubles as a car-maintenance tool and gets moved around. The Rapid Pump technology means fewer strokes to get the saddle up, which saves time on quick jobs like brake pads or tire rotations.
Maintenance and hydraulic care
Both jacks use hydraulic fluid and need the level checked over time. Follow the maker's directions for topping up and for bleeding air from the system if the jack feels spongy.
Keep the piston clean and wipe grit off the saddle before each use. A jack that lives on a dusty garage floor picks up grit that can wear the seals.
Handle and saddle details
The Big RED 4 Ton includes a rubber saddle pad that protects the lift point. The Maxority's saddle is designed for a stable hold, and its pumping handle is included.
Check that the saddle fits your vehicle's lift points. Pinch-weld seams and plastic covers need a pad or a slotted saddle, so match the jack to the underside of your car.
Who should buy the Big RED 4 Ton?
Buy the Big RED 4 Ton if your garage holds a full-size truck or SUV and you want capacity headroom on every lift. It's the overall winner for most readers with mixed vehicles.
The 8,000 lb rating leaves margin on heavy corners, and the 20 inch lift reaches high saddle points without maxing out the jack. The dual piston pump gets the saddle up quickly, which helps on taller vehicles.
The trade-offs are real. At 100.8 lb, it's not a jack you carry, and its 3-7/8 inch starting height rules it out for many lowered cars.
It also needs a bay wide enough for its stance.
If your driveway is flat concrete and your main job is lifting a truck for oil changes and tire rotations, the Big RED is the one to buy. The year of cover and the ASME safety standard add confidence.
Who should buy the Maxority 3 Ton?
Buy the Maxority 3 Ton if you work on cars and light SUVs and want a low-profile jack that slides under lowered vehicles. It's the better fit for tight bays and low cars.
The long reach gets to recessed lift points, and the low-profile body fits under sports cars and aftermarket setups. Rapid Pump technology saves strokes, and the 6,600 lb rating covers most passenger vehicles with room to spare.
The cons are worth knowing. The 90 day warranty is short, the random color means you can't choose the finish, and 6,600 lb is close to the limit for a heavy truck corner.
If a full-size pickup is in your future, the Big RED is the safer buy.
For a garage with one car and a low ceiling, the Maxority's lower body and lighter weight make it the easier jack to live with day to day.
Verdict: which floor jack fits your garage?
The Big RED 4 Ton is the better 4 ton floor jack for most home garages, and the Maxority 3 Ton is the better 3 ton pick for cars and low bays. The 3 ton vs 4 ton floor jack choice comes down to what you lift and how much space you have.
Pick the Big RED 4 Ton if you own a truck or heavy SUV and want one jack with capacity headroom. Pick the Maxority 3 Ton if you work on cars, lowered vehicles or anything that needs a low saddle and a long reach.
If your bay is narrow and your car sits low, the Maxority wins on fit. If your driveway holds a full-size pickup and you want margin on every lift, the Big RED wins on capacity.
Either way, pair the jack with stands rated above the corner load, and read our floor jack vs scissor jack comparison if you're still deciding whether a full garage jack is worth the space.
Frequently asked questions
Is a 4 ton floor jack overkill for a sedan?
Yes, for a typical sedan. A 4 ton jack is rated for 8,000 lb, and most sedans weigh far less.
A 3 ton jack handles a sedan with room to spare, so buy 4 ton only if you also lift trucks or SUVs.
How much weight can a 3 ton floor jack safely lift?
A 3 ton jack is rated for 6,000 lb, or 6,600 lb on the Maxority here. Use no more than about 75 percent of the rating for steady lifting, so a 3 ton jack suits vehicles up to roughly 4,500 lb.
Does a 4 ton floor jack lift higher than a 3 ton?
Not always. The Big RED 4 Ton reaches 20 inches and the Maxority 3 Ton reaches 19.9 inches, so the gap is tiny.
Compare the actual lift range for the jack you plan to buy rather than the tonnage.
Can I use a 4 ton jack on a low sports car?
Only if its saddle starts low enough. The Big RED 4 Ton starts at 3-7/8 inches, which is too tall for many lowered cars.
A low-profile 3 ton jack like the Maxority slips under more easily, so clearance matters more than capacity for low vehicles.
How heavy is a 4 ton floor jack to move around?
The Big RED 4 Ton weighs 100.8 lb. That's heavy enough to want the casters doing the work, and you'll notice it when lifting the jack in and out of a truck bed or onto a shelf.
Do 3 ton and 4 ton floor jacks use the same stands?
No. Pair each jack with stands rated above the load you support.
A 3 ton jack calls for at least 3 ton stands, and a 4 ton jack calls for at least 4 ton stands, so match the stand rating to the jack.
About this guide: Our look at 3 ton vs 4 ton floor jack draws on maker specs, materials and what owners report. See how we research.




