How Much Does a Floor Jack Weigh?
A floor jack can weigh about 30 to 90 lb: lighter aluminum models are easier to move, while full-size steel models can weigh more. Check the jack's listed item weight and plan how you'll lift and store it.
On this page (6 sections)
A floor jack can weigh about 30 to 90 lb, depending on its material, size, and design. Aluminum models are often easier to move, while full-size steel jacks can be heavier.
The capacity rating doesn't tell you the jack's own weight. If you'll carry one in a car or lift it onto a shelf, compare the item's weight before choosing.
How much does a floor jack weigh by material?
A floor jack's weight varies by construction and model, so check the specific jack rather than assuming a material sets an exact range. The examples below weigh 29.8 to 87.3 lb.
- A portable aluminum-and-steel hybrid may weigh less than 30 lb.
- A full aluminum jack can still weigh close to 60 lb.
- Steel models in these examples weigh about 64 to 87 lb.
These are examples, not fixed limits for every floor jack. A model's size, capacity, and design all affect its weight.
Does a higher-capacity floor jack weigh more?
Capacity and weight are related to a jack's design, but you can't infer one from the other. Check both specifications and choose a capacity that suits your vehicle.
A 1.5 ton hybrid jack here weighs 29.8 lb, while a 3 ton full aluminum jack weighs 57.8 lb. The 4 ton steel model weighs 87.3 lb, but those examples don't guarantee a rule for every product.
Before buying, confirm the jack's capacity and fit for your vehicle. For a closer look at capacity, read how much weight a 3 ton jack can lift.
Which floor jack is easiest to carry?
Among these four examples, the SATA 1.5 Ton Aluminum and Steel Hybrid Jack is lightest at 29.8 lb. Its hybrid construction and side handle suit someone who values portability.
The Yellow Jacket aluminum model weighs 57.8 lb and has a side handle for transport. That weight may still feel substantial when lifting it into a trunk, so consider where you'll store it and how you'll move it.
For more options, compare floor jacks and aluminum floor jacks you can carry. Check the individual weight and dimensions before choosing.
How heavy are these steel floor jacks?
The AV Steel 3 ton single piston jack weighs 63.9 lb, and the 4 ton heavy-duty model weighs 87.3 lb. Both are steel models, and the larger 4 ton example is heavier.
The 4 ton jack is described as a full-size professional jack. Its 87.3 lb weight may make it a poor fit if you need to lift your jack into a vehicle often.
A jack's wheels can help you reposition it on a suitable floor, but they don't make it easy to carry over steps or load into a car. If regular lifting is part of your routine, compare the weight alongside the lifting capacity and reach.
What should you check besides floor jack weight?
Check capacity, lift range, clearance, and storage space along with weight. A lighter jack isn't automatically right for your vehicle or the work you plan to do.
Read the jack's instructions and vehicle manual, and use only the vehicle's specified lift points. Never work beneath a vehicle supported only by a floor jack; use properly rated jack stands on a firm, level surface.
See what size jack stands you need before planning a lift.
Measure the storage area and any narrow doorway or trunk opening the jack must pass through. The guide to storing a floor jack covers ways to keep it accessible between jobs.
How much should your floor jack weigh?
Choose based on how you'll move and use it: the 29.8 lb hybrid is the lightest example here, while the heavier steel models may suit a setup where the jack stays near the work area. Compare the exact weight, capacity, and fit for your vehicle, then check floor jack options to narrow your choice.
How much does a floor jack weigh for a car?
A floor jack for a car can weigh from around 30 lb to well over 60 lb in these examples. The SATA hybrid weighs 29.8 lb, while the aluminum Yellow Jacket weighs 57.8 lb and the steel AV Steel 3 ton model weighs 63.9 lb.
Check the jack's own weight and vehicle fit before buying.
Frequently asked questions
How much does a typical floor jack weigh?
A floor jack may weigh roughly 30 to 90 lb, depending on its materials, size, and design. Aluminum models tend to be easier to carry, while full-size steel models can be heavier.
Check the exact item's weight before you buy, especially if you'll lift it into a vehicle or carry it up steps.
Is an aluminum floor jack lighter than a steel one?
Often, yes. Aluminum construction can reduce a floor jack's weight, though a jack's size and design also matter.
For example, a full aluminum 3 ton model weighs 57.8 lb, while the steel 3 ton model below weighs 63.9 lb.
Compare actual weights instead of relying on material alone.
Does a heavier floor jack lift more weight?
Not necessarily. A jack's own weight and its rated lifting capacity are separate specifications.
Check that the capacity suits your vehicle and that the jack fits its approved lift points; don't use the jack's weight as a guide to how much it can lift.
How can I move a heavy floor jack safely?
Use its wheels to roll it on a clear, level path, and keep your hands away from pinch points. For lifting it into a vehicle or onto a shelf, check the weight first and use help or a suitable lifting aid if needed.
Store it where you can reach it without awkward lifting.
