Best 3 Ton Low Profile Floor Jack: Top 7 Picks (November 2026)
The best 3 ton low profile floor jacks include the ARCAN A20019 3 Ton Aluminum Low Profile Floor Jack (best overall), the Jack Boss 3 Ton Aluminum and Steel Racing Floor Jack for fast wheel swaps, and the AV Steel 3 Ton Low Profile Dual Piston Floor Jack for lifted or high-clearance vehicles.
On this page (6 sections)
The best 3 ton low profile floor jack for most people is the ARCAN A20019. Its 3.75 in starting height clears low cars, its 18 in top end handles most SUVs and light trucks, and its aluminum body weighs 56 lb so you can move it without a fight.
The Jack Boss is the pick when you change wheels often and want fewer pump strokes. The AV Steel goes higher for lifted vehicles, and the ARCAN A20003 is the steel workhorse for a fixed garage bay.
Every jack here carries a 3 ton rating, but they differ in starting height, top lift, pump type and weight. Those four numbers decide whether a jack fits your car and your storage.
Capacity matters less than people think once you're above 3 tons.
Our picks at a glance
-
1
-
2
Best for fast wheel swapsJack Boss 3 Ton Aluminum and Steel Racing Floor Jack
8.7/10 our score
See it on Amazon -
3
Best for lifted or high-clearance vehiclesAV Steel 3 Ton Low Profile Dual Piston Floor Jack
8.5/10 our score
See it on Amazon
- 4
Check itMaxority 3 Ton Low Profile Steel Floor Jack
Best for lowered cars - 5
Check itSATA 3 Ton Aluminum Floor Jack
Best for light weight and safety checks - 6
Check itARCAN A20003 3 Ton Steel Low Profile Floor Jack
Best for steady, repeated shop use - 7
Check itYellow Jacket 3 Ton Aluminum and Steel Floor Jack
Best for protecting the vehicle
How we picked these 3 ton low profile jacks
We compared the published specs on each jack and weighed them against what most home mechanics need: low clearance access, a workable top lift and a body you can move. Our score weighs specs, features and buyer feedback against what you're shopping for.
Starting height decides fit. A jack that starts at 3-1/8 in reaches more low cars than one starting at 3.94 in.
If your daily driver is lowered, that fraction of an inch is the difference between sliding under and jacking from the pinch weld edge.
Top lift decides reach. An 18 in saddle tops out below the frame rail on some lifted trucks.
A 19.9 in top end gives you more room for taller vehicles and axle work.
Pump type decides effort. Dual-piston pumps raise the saddle in fewer strokes, which matters when you do four wheels in a row.
Single-pump jacks take more handle travel for the same height.
The Jack Boss, AV Steel, SATA and Yellow Jacket all use two pistons here, while the two ARCAN jacks rely on a single pump and a quick-rise saddle design.
Weight decides where the jack lives. Aluminum jacks in this group weigh around 56 to 59 lb.
Steel models run heavier, so a steel jack belongs in a fixed bay rather than a trunk.
The ARCAN A20003 is the outlier at 76.8 lb.
Safety features matter at 3 tons. Bypass and overload valves, load limiting devices and factory overload tests all protect the hydraulic system and the person under the car.
The Jack Boss and SATA jacks are tested to 1.5x their rating.
The AV Steel and Yellow Jacket meet ANSI/ASME PASE standards, and the ARCAN models use bypass and overload valves to stop over-extension.
The frame matters as much as the material. Aluminum saves weight, but several picks here pair an aluminum body with a steel frame or steel casters.
That mix adds strength at the lifting arm and pivot points while keeping the jack easy to roll.
Read the material listing closely, because "aluminum jack" rarely means all aluminum.
| Product | Best for | Capacity | Lifting range | Weight | Our score |
|---|---|---|---|---|---|
| ARCAN A20019 3 Ton Aluminum Low Profile Floor Jack | overall | 3 ton (6,000 lb) | 3.75 to 18 in | 56 lb | 8.9 |
| Jack Boss 3 Ton Aluminum and Steel Racing Floor Jack | fast wheel swaps | 3 ton (6,600 lb) | 3-15/16 to 18-5/16 in | 58.5 lb | 8.7 |
| AV Steel 3 Ton Low Profile Dual Piston Floor Jack | lifted or high-clearance vehicles | 3 ton (6,600 lb) | 3-1/8 to 19-7/8 in | 8.5 | |
| Maxority 3 Ton Low Profile Steel Floor Jack | lowered cars | 3 ton (6,600 lb) | Up to 19.9 in | 8.4 | |
| SATA 3 Ton Aluminum Floor Jack | light weight and safety checks | 3 ton (6,600 lb) | 3-3/4 to 19-1/8 in | 8.4 | |
| ARCAN A20003 3 Ton Steel Low Profile Floor Jack | steady, repeated shop use | 3 ton (6,000 lb) | 76.8 lb | 8.3 | |
| Yellow Jacket 3 Ton Aluminum and Steel Floor Jack | protecting the vehicle | 3 ton (6,600 lb) | 3.94 to 18-5/16 in | 58.6 lb | 8.2 |
Best 3 Ton Low Profile Floor Jacks
Each pick below solves a different job. The first one is the best all-rounder for most readers, and the rest are the best pick for a named need.
ARCAN A20019 3 Ton Aluminum Low Profile Floor Jack: Best overall
- 3 ton (6,000 lb) capacity
- 3.75 in to 18 in lifting range
- Aircraft-grade aluminum
- Side-mount handle
A light aluminum jack with a low 3.75 in saddle height and an 18 in top end. Good for most low sedans and light trucks.
Pros
- Low 3.75 in starting height
- Lighter than the steel picks here
- Bypass and overload valves
- Side-mount handle
Cons
- 1 year warranty
- Saddle top stops at 18 in
The ARCAN A20019 is the best all-rounder here for a simple reason: it combines a 3.75 in low start with an 18 in top lift in a 56 lb aluminum body. That covers a low sedan, a crossover and most light truck axles without dragging a heavy steel jack across the floor.
The frame measures 30 x 13.5 x 8 inches when stored, so it tucks against a garage wall.
ARCAN builds the frame from aircraft-grade aluminum and reinforces the lift arm for torsion control under load. The side-mount handle lets you position the jack from different angles, which helps in tight bays.
Bypass and overload valves stop over-extension. The 6,000 lb rating leaves headroom for a corner of almost any passenger vehicle.
The trade-off is the warranty: 1 year, the same as most of this group. The saddle also stops at 18 in, so it sits below the AV Steel and Maxority for lifted vehicles.
Its 3.75 in start is lower than the Yellow Jacket but not quite as low as the AV Steel.
Choose it if you want one light jack for a mix of cars and light trucks. It is the pick we would make first.
Jack Boss 3 Ton Aluminum and Steel Racing Floor Jack: Best for fast wheel swaps
- 3 ton (6,600 lb) capacity
- 3-15/16 in to 18-5/16 in range
- Dual-piston quick lift pump
- Factory tested to 1.5x capacity
A dual-piston pump cuts the strokes needed to reach height. The rubber saddle protects lifting points during tire service.
Pros
- Dual-piston quick lift pump
- Rubber saddle protects lift points
- Factory tested to 4.5 tons
- Meets ANSI/ASME PASE standards
Cons
- 58.5 lb is heavier than the ARCAN aluminum
- Top lift is 18-5/16 in
The Jack Boss is the best pick for fast wheel swaps because its dual-piston quick lift pump cuts the strokes needed to reach height. A rubber saddle grips the lift point and protects the paint on your vehicle's jacking points.
Its range runs from 3-15/16 in to 18-5/16 in, close to the ARCAN A20019. The body measures 28.3 x 13.7 x 7.8 inches.
Jack Boss tests each unit to 4.5 tons, 1.5x the 3 ton rating, and the jack meets ANSI/ASME PASE safety standards. Steel casters and swivel front casters keep it rolling smoothly, and the two-piece handle makes it easier to carry and position.
The 58.5 lb weight is the trade-off. That is about 2.5 lb more than the ARCAN aluminum, and you feel it when you lift the jack out of a trunk.
The rubber saddle is also taller than a bare metal one, so check your lowest lift point.
Pick it if you change tires or rotate wheels often and want a quick pump. The ARCAN A20019 stays the better default for general use.
AV Steel 3 Ton Low Profile Dual Piston Floor Jack: Best for lifted or high-clearance vehicles
- 3 ton (6,600 lb) capacity
- 3-1/8 in to 19-7/8 in range
- 360 degree rotating saddle
- Alloy steel frame
The highest top lift here at 19-7/8 in, with a 3-1/8 in start. Suits taller vehicles that still need a low approach.
Pros
- Highest top lift in this group
- Rotating saddle centers the load
- Overload protection
- Meets ANSI/ASME PASE standards
Cons
- Steel body is heavy
- Not the lightest to move around
The AV Steel is the best pick for lifted or high-clearance vehicles. Its top lift reaches 19-7/8 in, the highest in this group, while the 3-1/8 in start keeps it usable under low cars too.
That combination is rare among steel jacks.
The 360 degree rotating saddle helps you center the load on angled lift points. A dual-piston pump shortens the lifting time, and overload protection guards the hydraulic system.
The alloy steel frame meets ANSI/ASME PASE standards. Two rotating rear wheels make it easy to steer and roll into place under a tall vehicle.
Steel brings weight. At 6600 lb capacity this is not the jack you carry up a flight of stairs or stash in a small trunk.
The warranty is 12 months, which matches most here. The long 19-7/8 in reach also needs clear space under the vehicle.
Note that the spec sheet lists a 19.69 in minimum height next to the 3-1/8 in figure in the bullets, so confirm the starting height on the listing before you buy.
Choose it if your garage serves a lifted truck or a tall SUV and you want a low approach at the same time. For a plain car, the lighter ARCAN A20019 does the job with less effort.
Maxority 3 Ton Low Profile Steel Floor Jack: Best for lowered cars
- 3 ton (6,600 lb) capacity
- Long reach for low clearance
- RAPID PUMP hydraulic system
- Built-in safety valve
A long-reach steel jack for sports cars and lowered vehicles. The rapid pump cuts strokes and the safety valve guards against overload.
Pros
- Long reach for low clearance
- RAPID PUMP quick lift
- Built-in overload safety valve
- Stable lift saddle
Cons
- Steel build is heavier than aluminum jacks
- 90 day warranty
The Maxority is the best pick for lowered cars and sports cars. Its long reach gets under low ground clearance, and the RAPID PUMP system raises the saddle with fewer strokes.
The steel body stands up to repeated use.
The lift saddle has a built-in safety valve to prevent overloading. A stable saddle holds the vehicle and limits slips while it is up.
Maxority lists a top lift of 19.9 in, putting it near the AV Steel at the high end. The handle comes as a pumping handle only, so plan on storing it with the jack.
The trade-off is the warranty: 90 days, the shortest in this group. The steel construction is also heavy for a home garage where the jack gets moved around.
The long reach needs room under the car, so a very low splitter may still block it.
Pick it if you work on a lowered car or sports car and want a long-reach steel jack. For a light jack you carry often, look at the aluminum picks.
SATA 3 Ton Aluminum Floor Jack: Best for light weight and safety checks
- 3 ton (6,600 lb) capacity
- 3-3/4 in to 19-1/8 in range
- 30 percent lighter than steel models
- Tested to 1.5x overload
SATA builds this from aluminum and tests every unit to 1.5x its rating. The dual-piston pump reduces handle effort.
Pros
- 30 percent lighter than steel models
- Each unit tested to 1.5x overload
- Dual-piston pump reduces effort
- Slow-release lowering
Cons
- Aluminum is pricier than steel at this capacity
- Not the highest lift in this group
The SATA is the best pick for light weight and safety checks. SATA builds it from aluminum, which makes it 30 percent lighter than steel models, and tests every unit to 4.5 tons, 1.5x its 3 ton rating, before it ships.
The dual-piston pump reduces handle effort by 40 percent and cuts lifting time in half, per SATA. The 3-3/4 in to 19-1/8 in range fits low sedans, SUVs and light trucks.
A slow-release system lowers the vehicle in a controlled way, and an overload valve protects the hydraulics. The frame measures 28.35 x 13.58 x 6.34 inches and comes with a user manual.
Aluminum costs more than steel at this capacity, so this jack sits at the higher end of the group. Its top lift of 19-1/8 in is good but not the highest here.
The 1.5x overload test is the standout feature.
Choose it if you want a light jack and value the factory overload test. The ARCAN A20019 is the closer match for a tight budget.
ARCAN A20003 3 Ton Steel Low Profile Floor Jack: Best for steady, repeated shop use
- 3 ton (6,000 lb) capacity
- Low profile frame
- High carbon steel side plates
- Ball bearing rear casters
A heavy steel jack with reinforced side plates and wiper seals. Built for daily service work rather than carrying around.
Pros
- Reinforced high carbon steel chassis
- Wiper seals protect hydraulics
- Ball bearing rear casters
- Long handle for controlled lifting
Cons
- 76.8 lb is the heaviest here
- Higher 7.5 in minimum height
The ARCAN A20003 is the best pick for steady, repeated shop use. Its high carbon steel side plates reinforce the chassis for demanding service, and wiper seals protect the internal hydraulics from dirt and grit.
Wide front wheels and ball bearing rear casters keep it stable and maneuverable.
The long handle gives leverage for controlled lifting and lowering. Bypass and overload safety valves guard against over-extension and use beyond the 3 ton rating.
That combination suits a fixed garage bay where the jack stays on the floor. The frame measures 29.3 x 13.8 x 6.3 inches when stored.
The 76.8 lb weight is the trade-off, and the minimum height is 7.5 in, the highest start in this group. That rules it out for low cars.
It is a shop jack, not a trunk jack. The 1 year warranty matches the ARCAN A20019.
Pick it if you want a heavy steel jack that stays in one place and takes daily use. For low cars or carrying, the aluminum ARCAN A20019 is the better fit.
Yellow Jacket 3 Ton Aluminum and Steel Floor Jack: Best for protecting the vehicle
- 3 ton (6,600 lb) capacity
- 3.94 in to 18-5/16 in range
- Large rubber saddle and foam handle bumper
- Load limiting protection
A dual-pump jack with a large rubber saddle and a foam handle bumper. The load limiting device protects when weight runs high.
Pros
- Large rubber saddle
- Foam bumper on the handle
- Load limiting protection device
- Meets ANSI/ASME PASE standards
Cons
- Highest starting height among the aluminum and aluminum/steel picks
- Steel and aluminum mix adds weight
The Yellow Jacket is the best pick for protecting the vehicle. It has a large rubber saddle and a foam bumper on the handle, so the jack is less likely to scratch paint or lift points during service.
A load limiting device starts protecting automatically when weight runs high.
Its dual-piston pump lifts faster than a single pump. The range runs from 3.94 in to 18-5/16 in, and the jack meets ANSI/ASME PASE safety standards.
Two universal casters and two front rollers make it easy to move, and the side handle helps with positioning. The alloy steel and aluminum body measures 28.35 x 13.78 x 7.87 inches.
The trade-off is the starting height: 3.94 in is the highest among the aluminum and aluminum/steel picks. That is fine for many cars but too tall for a very low vehicle.
The aluminum and steel mix weighs 58.6 lb, so it is no lighter than the Jack Boss.
Choose it if protecting the car's finish matters more than the lowest possible start. For a slammed car, the AV Steel or Maxority gets under it better.
Which 3 ton low profile floor jack fits your car?
The right jack starts with the gap under your car's lift point. Measure that gap first, then match it to a jack's minimum height with a little margin.
A jack that starts at 3.75 in clears most low cars; one at 3.94 in needs a bit more room.
Matching starting height to your vehicle
Measure from the ground to the lowest safe lift point on your car, not to the bumper. Add a quarter inch for margin.
The ARCAN A20019 and SATA start at 3.75 in and 3-3/4 in respectively, while the AV Steel goes to 3-1/8 in. The Yellow Jacket at 3.94 in is the highest among the aluminum and aluminum/steel picks here, so skip it for a lowered car.
The steel ARCAN A20003 starts at 7.5 in and is meant for taller vehicles and shop use only.
If you drive a stock sedan or crossover, any jack in this group fits. If you drive a lowered car or a sports car, the AV Steel and Maxority give you the most clearance.
Measure before you buy.
Matching top lift to the job
Top lift decides whether the saddle reaches the frame rail on a taller vehicle. An 18 in top end covers most cars and many SUVs.
The AV Steel at 19-7/8 in and the Maxority at 19.9 in give you more room for lifted trucks and axle work. The SATA at 19-1/8 in sits in between.
If you only lift one corner for a tire change, 18 in is plenty. If you do suspension work or lift a truck, go higher.
Our guide to the best floor jack for an SUV covers the height and weight needs of larger vehicles in more detail.
Aluminum, steel or both
Aluminum jacks in this group weigh around 56 to 59 lb. The steel ARCAN A20003 weighs 76.8 lb.
Aluminum costs more but is easier to carry and move. Steel lasts through repeated shop use and stays put.
The Jack Boss and Yellow Jacket mix aluminum and steel. That gives you a lighter body with a steel frame for strength.
If you carry the jack in a trunk, pick aluminum. If it stays in a garage bay, steel is fine.
Our roundup of aluminum floor jacks you can carry covers the lightest options if portability is the priority.
How much jack do you need for 3 tons?
A 3 ton jack is more than enough for most passenger cars, SUVs and light trucks. A 3 ton rating means 6,000 to 6,600 lb depending on the model.
A typical SUV weighs 4,000 to 5,000 lb total, and you lift one corner at a time.
The rating matters most when you lift a heavy vehicle or work under a loaded truck. A 3 ton jack gives you headroom over a 2 ton model.
If you only work on small cars or crossovers, a 2 ton jack may be enough. Our roundup of the best 2 ton floor jacks covers the lighter options.
Weight capacity is only part of the decision. A 2 ton jack with a low start can be a better fit for a small car than a heavy 3 ton steel jack.
Match the rating to your heaviest vehicle and the height to your lowest lift point.
Reading the capacity label correctly
The 3 ton figures here split into 6,000 lb on the two ARCAN jacks and 6,600 lb on the Jack Boss, AV Steel, SATA and Yellow Jacket. The difference comes from rounding, not from a real gap in strength.
Either figure leaves room over the corner weight of most vehicles.
What matters more is how the rating is proven. Jack Boss and SATA state a 1.5x overload test, so each unit is pushed to 4.5 tons before it ships.
The AV Steel and Yellow Jacket state ANSI/ASME PASE compliance. The ARCAN jacks rely on bypass and overload valves that stop the pump from over-extending.
A capacity number without a test or a valve behind it tells you less than one with either.
Low profile jacks and safety
A low profile jack only helps if you use it safely. Always chock the wheels and place jack stands under the vehicle before you go under it.
A floor jack lifts; it does not hold.
Check the jack's overload protection before you buy. Bypass and overload valves, load limiting devices and factory overload tests all reduce the risk of hydraulic failure.
The Jack Boss and SATA jacks are tested to 1.5x their rating. The ARCAN jacks have bypass and overload valves.
Lower the vehicle slowly. A slow-release system like the SATA's gives you a controlled descent.
On jacks without one, turn the release valve gently and let the car settle.
Store the jack with the handle down and the saddle at its lowest point. Wipe the piston rod after use to keep grit out of the seals.
The ARCAN A20003's wiper seals help here, but cleaning still extends the life of any jack.
Best 3 ton low profile floor jack: the verdict
The ARCAN A20019 is the best 3 ton low profile floor jack for most readers. It balances a 3.75 in low start, an 18 in top lift and a 56 lb aluminum body that you can actually move.
That mix covers low cars and light trucks without the weight of steel.
Pick the Jack Boss if you change wheels often and want a faster pump with a rubber saddle. Pick the AV Steel if your garage serves a lifted truck and you need the highest top lift.
Pick the ARCAN A20003 if you want a steel jack that stays in one bay.
If you are shopping by budget, our roundup of the best floor jacks for the money compares value picks across capacities. Measure your car's lift point gap first, then choose the jack that fits it.
Our top 3 picks at a glance
-
1
-
2
Best for fast wheel swaps
Jack Boss 3 Ton Aluminum and Steel Racing Floor Jack
8.7/10 our score
See it on Amazon -
3
Best for lifted or high-clearance vehicles
AV Steel 3 Ton Low Profile Dual Piston Floor Jack
8.5/10 our score
See it on Amazon
Frequently asked questions
What makes a floor jack low profile?
A low profile floor jack starts at a low saddle height so it slides under cars with limited ground clearance. Among the aluminum and aluminum/steel picks here the minimums run from 3-1/8 in to 3.94 in, while the steel ARCAN A20003 starts at 7.5 in.
Measure the gap under your lowest lift point and compare it with the jack's starting height before you buy.
Is a 3 ton floor jack enough for an SUV or light truck?
Yes for most passenger vehicles. A 3 ton jack is rated for 6,000 to 6,600 lb depending on the model, well above the corner weight of typical SUVs and light trucks.
Check your vehicle's weight and lift one corner at a time.
What is a dual piston pump on a floor jack?
A dual piston pump uses two hydraulic pistons to raise the saddle with fewer handle strokes than a single pump. The Jack Boss, AV Steel, SATA and Yellow Jacket jacks here all use a dual-piston setup to shorten lifting time.
How much height does a 3 ton low profile jack reach?
Top lift in this group ranges from 18 in to 19.9 in. That covers most cars and many SUVs.
If you need more room under a lifted truck, choose a jack with the highest top end, like the AV Steel at 19-7/8 in.
